Ballistol for Kitchen & Bathroom Fitters

Kitchen and bathroom fitters finish every job with a handover, and the small things get noticed. Drawers that stick, sticker glue on new appliances and smears on mirrors are the usual ones. PTFE Spray leaves a dry film on drawer runners and sliding mechanisms, Cold Degreaser lifts stickers and glue, and Glass Cleaner leaves mirrors and shower screens streak-free.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Drawers that run on handover day

PTFE Spray stops runners and mechanisms sticking with a dry film.

Stickers and glue removed

Cold Degreaser lifts stickers and the glue left behind from metal, plastic and glass.

Streak-free mirrors

Glass Cleaner removes fingerprints and leaves an invisible film that delays new dirt.

Clean cutters

Resin Remover wipes resin off saw blades and router cutters without leaving residue.

Application

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean the runner or mechanism, spray a thin, even coat from 15 to 20cm and leave it a few minutes to dry. Keep it off worktops and anything that touches food.

  • Cold Degreaser 200ml

    Peel off the sticker, spray the glue left behind and wipe clean. Try a hidden spot first on printed or coated finishes.

  • Glass Cleaner

    Spray mirrors and screens and wipe with a microfibre cloth before it dries, avoiding runs.

  • Resin Remover

    Spray the blade or cutter, leave it a few minutes and wipe clean with kitchen roll. Wear gloves, and oil the steel afterwards.

Areas

Kitchens

Drawer runners, hinges and larder mechanisms.

Bathrooms

Mirrors, shower screens and new sanitaryware.

Cutting station

Saw blades and router cutters used on worktops.

Van

Tools and fixings between jobs.

Uses

  • Easing drawer runners, hinges and sliding larder mechanisms
  • Removing stickers and glue from appliances, sinks and glass
  • Leaving mirrors and shower screens streak-free at handover
  • Cleaning resin build-up off saw blades and router cutters
  • Protecting tools in the van from rust

Ordering in volume

Fitting firms usually stock each fitter's van and reorder as jobs run it down. Showrooms with their own fitting teams can order for the showroom and the vans together.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.