Ballistol for Defence Contractors

Defence contractors machine, assemble, store and ship parts that have to arrive free of rust. Universal Oil protects machined parts between operations, PTFE Spray gives a dry, non-conductive film for guides and mechanisms near electronics, Cold Degreaser cleans before painting or assembly, and Silicone Oil looks after rubber seals and O-rings.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Parts protected between operations

A thin film of Universal Oil keeps damp off bare metal.

Non-conductive dry film

PTFE Spray suits precision parts and mechanisms near electronics.

Clean before assembly

Cold Degreaser removes oil, grease and dried resinified oil.

Data for approval

Technical and safety data sheets are published for every product.

Application

  • Ballistol Universal Oil

    Wipe off swarf and dirt, spray a thin coat on bare metal and wipe off the excess, leaving a thin film for storage.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean and dry the guide or rail, shake the can, spray a thin coat from 15 to 20cm and let it flash off before use.

  • Cold Degreaser 200ml

    Spray the part, let it work on the grease and wipe clean before painting or assembly.

  • Silicone Oil Spray, 65ml

    Wipe seals clean, apply a thin coat with a cloth and buff off the excess.

  • Robla Solo Mil

    For test barrels, plug one end, fill with Robla Solo Mil and leave it a couple of hours before draining. Then push dry felts through and oil the bore.

Areas

Machine shop

Machined parts between operations.

Assembly

Parts degreased before fitting or painting.

Stores

Parts and tools kept for long periods.

Test and proof

Test weapons and barrels.

Uses

  • Protecting machined parts from rust between operations
  • Lubricating slide rails and mechanisms near electronics with dry PTFE
  • Degreasing parts before painting or assembly
  • Caring for rubber seals and O-rings
  • Protecting parts and tools in storage and transit
  • Cleaning test barrels with Robla Solo Mil and Gunex

Ordering in volume

Contractors usually need data sheets for supplier approval before a first order and then reorder on a regular cycle, so tell us what your approval process needs.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.