Ballistol for Joiners & Carpenters
Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.
Products for large orders
-
Resin Remover
From £7.35 retail
-
Ballistol Universal Oil
From £4.50 retail
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
£6.75 retail
-
Cold Degreaser 200ml
£7.45 retail
-
Scherell Stock Oil
From £8.79 retail
Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.
Benefits
Pitch off cutters
Resin Remover softens resin so it wipes off blades and bits without leaving residue.
Edge tools protected
A thin film of Universal Oil keeps rust off chisels, planes and saws.
Dry film on wood
PTFE Spray works on wood as well as metal, so runners and hinges stop sticking.
Ready for finish
Cold Degreaser removes oil and grease before painting or varnishing.
Application
-
Resin Remover
Take the blade off, spray both faces and leave it a few minutes. Wipe the softened resin away, using a brass brush on the teeth, and oil the blade before refitting. Wear gloves.
-
Ballistol Universal Oil
Wipe edge tools clean, spray or drip a thin coat and wipe off the excess. On dry handles, rub it in with a cloth, leave it to soak in and buff.
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
Clean dirt and old lubricant from the runner or hinge, spray a thin coat from 15 to 20cm and leave it a few minutes to dry.
-
Cold Degreaser 200ml
Spray the surface and wipe off oil and grease before painting or varnishing.
-
Scherell Stock Oil
Apply a small amount to open-pore wood, rub it in and leave it to soak. Buff off the excess and build up thin coats.
Areas
Machine shop
Saw blades, router bits, planer knives and spindle cutters.
Bench
Chisels, planes, saws and wooden handles.
Site fitting
Drawers, doors, hinges and sliding gear.
Finishing
Surfaces prepared for paint, varnish or oil.
Uses
- Cleaning resin off saw blades, router bits and planer knives
- Protecting chisels, planes and saws from rust
- Caring for dry wooden tool handles
- Easing drawer runners, sliding doors and hinges on fitted furniture
- Degreasing surfaces before painting or varnishing
- Conserving oiled furniture and fine woods with Scherell
Ordering in volume
- Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
- Mix products and sizes in one order. Tell us if you need something that is not listed here.
- If you reorder regularly, tell us how often and we will plan stock around you.
- Technical and safety data sheets for every product are on our technical data page.
- We confirm price and delivery before anything is sent, then invoice you.
Want to sell Ballistol in your shop instead? See trade and wholesale accounts.









